Pi-DigiAMP+ View larger

Pi-DigiAMP+

Pi-DigiAMP+

New

This is a combined DAC and AMP solution in one device.

Full-HD stereo (up to 2x35w) solution for the Raspberry Pi (A+/B+/2/3), complete with PCB spacers and screws.

OUT OF STOCK - BACK SOON - MORE BEING MANUFACTURED

More details

This product is no longer in stock

£ 58.00 Tax included

Data sheet

Full-HD 192kHz / 24bit YES
Electrically compatible with Pi Zero YES
Designed for Pi Zero NO
Raspberry Pi2 compatible YES
Raspberry A+/B+ compatible YES
Raspberry A+ compatible YES
Raspberry B+ compatible YES
Compatible with original Raspberry Pi NO
Pi-DAC+ compatible NO
Pi-CASE+ Compatible YES
Pi-AMP+ Compatible NO

More info

Pi-DigiAMP+

NO SOLDERING REQUIRED, simply “FIT AND ENJOY.”

Designed to deliver the best audio performance from the Raspberry Pi A+/B+/RPi2/3, fit within the Pi’s form factor and provide additional access to several of the Pi’s 40way I/O signals allowing easy addition of IR sensors, Rotary Encoder or i2c devices (such as OLED screens) etc.

The Pi-DigiAMP+ takes everything we’ve learned from the previous Pi-AMP+ and Pi-DAC+ combination, shrinks it down and reduced the overall system cost by around £25!

We have used the latest Texas Instruments chipset (TAS5756m) to deliver awesome performance from a single HAT board. As with our other products you can be assured that the Linux driver support is already built-in to Raspbian Linux (using the same device drivers as the Pi-DAC+) and supported by the many software audio packages already on the market. RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others. The IQaudIO Pi-DigiAMP+ easily supports 24-bit / 192kHz file formats but is equally at home with lower quality MP3s bringing your music alive sonically.

Please note that The Pi-DigiAMP+ uses GPIO22 as amp-mute and when powered on is in mute state, examples are in the user docs and many software releases already support the Pi-AMP+ in the same way.

The IQaudIO Pi-DigiAMP+ connects easily to the Raspberry Pi and provides up to 2 x 35W stereo output to speakers.

The IQaudIO Pi-DigiAMP+ Features:

  • HAT compliant accessory; EEPROM, mounting holes
  • Full-HD audio – up to 24-bit/192kHz playback
  • Up to 2x35w of crystal clear amplification
  • No soldering required to your Raspberry Pi
  • Integrated hardware volume control (via ALSA)
  • Powers the Raspberry Pi from the Pi-DigiAMP+ power input
  • Linux driver support already delivered within Raspbian
  • AMP can be enabled / disabled via Raspberry Pi’s GPIO22
  • Advanced ESD protection
  • Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
  • Fully built and tested Raspberry Pi accessory
  • Designed and manufactured in the UK

The IQaudIO Pi-DigiAMP+ is suitable for the latest Raspbery Pi A+/B+, RPi2 AND RPi3 it is not compatible with much older Raspberry Pi A and B Models.

The Pi-DigiAMP+ is supplied with all mounting hardware and the Pi-CASE+ now comes with an extra side panel allowing it to be used with the Pi-DigiAMP+ too. If you intend to mount your Pi / Pi-DigiAMP+ on the official 7" screen then you'll need to also buy the extra spacer pack. 

NOTE: The Pi-DigiAMP+ requires an external power supply / brick, and when powered the Pi-DigiAMP+ provides power to your Raspberry Pi in parallel. We recommend the XP Power VEF50US15 (for 2x20w) and VEF65US19 (for 2x35w).

Reviews

Grade 
21/10/15

Genuine high fidelity audio

I am by no means a "techie" but I wanted a low-cost streamer, DAC and amp for my office. I looked at various "big name" options as well as some of the "giant-killer" budget DACs and T-amps etc, but this ticked all the boxes.

Hooking it up was child's play, Gordon from IQaudio was very supportive and the sound is absolutely fantastic - it drives my Tannoy DC4s with 89dB sensitivity easily and Moode is pre-configured to work (auto unmute etc). The sound is absolutely first rate - my main hi fi rig is many, many times more expensive but the IQaudio Pi-DigiAMP+ has me wondering whether I should keep it! Both Gordon and his products are highly recommended.

  • 2 out of 2 people found this review useful.
Grade 
08/10/15

Great addition to my audio pi family!

The Digi-Amp works brilliantly and exactly as advertised. I had some difficulty getting the GPIO to work as I wanted, but using the images IQaudio make available resolved this:). I've settled on Moode (which I use also on my Pi-Dac+ with my main system), but it worked just as well with Volumio and Rune.

If you have concerns the volume may be a little low, don't This drives my older B&W686 very well, and simply belts music out from the more sensitive Klipsch RP-260Fs. Great fun:)

  • 3 out of 3 people found this review useful.

Write a review

Pi-DigiAMP+

Pi-DigiAMP+

This is a combined DAC and AMP solution in one device.

Full-HD stereo (up to 2x35w) solution for the Raspberry Pi (A+/B+/2/3), complete with PCB spacers and screws.

OUT OF STOCK - BACK SOON - MORE BEING MANUFACTURED